Welcome to Joe Rocket Canada® - Canadians Ride Rocket
Welcome to Joe Rocket Canada® - Canadians Ride Rocket
EST. 1992 - THIRTY YEARS OF CHAMPIONS
LUGGAGE
REPLACEMENT ARMOUR
472-6244D
SIZING: TO MEASURE YOUR HEAD SIZE, WRAP A TAPE MEASURE HORIZONTALLY AROUND YOUR FOREHEAD. SELECT THE HELMET THAT IS THE CLOSEST FIT TO THAT SIZE. A HELMET SHOULD FIT SNUG ON YOUR HEAD. IF IT MOVES WHILE WEARING, IT IS TOO LARGE. IF IT IS PAINFUL TO WEAR, IT IS TOO SMALL. FOR PROPER SIZING, YOUR NEAREST DEALER WILL BE ABLE TO HELP YOU GET SIZED UP.
FITTING: OPEN THE CHIN STRAPS AND SLIDE THE HELMET ONTO YOUR HEAD STARTING AT THE FOREHEAD. A HELMET SHOULD FEEL SNUG. IF IT SLIDES ON EASILY IT IS TOO BIG. IT SHOULD FEEL TIGHT TO PULL DOWN. MAKE SURE THE INNER PADDING FITS SNUG ALL AROUND. YOU SHOULD FEEL THE PADDING PRESSING AGAINST YOUR CHEEKS AND HEAD. THE LAST CHECK FOR A PROPER FIT IS TO TEST IF IT MOVES WHILE WEARING, THERE SHOULD BE NO MOVEMENT IF YOU SHAKE YOUR HEAD. PLACE YOUR HANDS ON THE HELMET AND MOVE IT FRONT TO BACK AND SIDE-TO-SIDE. IF THERE IS A LOT OF MOVEMENT, TRY A SIZE DOWN.
SHELL 1 | ||||||
Helmet Size | XS | SM | MD | LG | XL | 2XL |
Head Measurement | 53-54cm | 55-56cm | 57-58cm | 59-60cm | 61-62cm | 63-64cm |
SHELL 1 | SHELL 2 | |||||
Helmet Size | XS | SM | MD | LG | XL | 2XL |
Head Measurement | 53-54cm | 55-56cm | 57-58cm | 59-60cm | 61-62cm | 63-64cm |
SHELL 1 | SHELL 2 | |||||
Helmet Size | XS | SM | MD | LG | XL | 2XL |
Head Measurement | 53-54cm | 55-56cm | 57-58cm | 59-60cm | 61-62cm | 63-64cm |
SHELL 1 | SHELL 2 | |||||
Helmet Size | XS | SM | MD | LG | XL | 2XL |
Head Measurement | 53-54cm | 55-56cm | 57-58cm | 59-60cm | 61-62cm | 63-64cm |
Elbow, shoulder, knee and hip impact protectors are to be present in Class AAA and AA garments as a mandatory requirement, with the hip protectors being optional in Class A garments. EN 1621 impact protectors must be positioned in the garment so that they cover the appropriate body part, according to the relevant impact protector standard. Class B garments are designed to provide the equivalent abrasion protection of Class A garments but without the inclusion of impact protectors. Class C garments are designed to provide impact protection for areas covered by the impact protector(s) only, and they do not offer minimum abrasion protection. Class C garments are intended to be worn with and supplement the protection offered by Class AAA, AA, A or B garments.
Functional rear storage pocket
System converts the waterproof jacket into a mesh jacket when removing shell.
Attached clip for holding keys
Soft flannel material
Advanced Thermo-Poly Alloy
A quick change shield replacement system
Soft warm fabric with a texture similar to sheep’s wool
Mesh fabric that allows air to pass through it freely
Interior drop down sun shield
Optically correct, anti-scratch and UV resistant
Fabric allows air to pass through
Interior jacket liner is of a quilted fabric for maximum comfort
Includes C.E. approved armour
Has a storage pocket for helmet shield
Trademarked water proof fabric
Fabric stretches and recovers both width and lengthwise
Does not allow water to penetrate material
Does not allow water to penetrate material
Vault™ is a trademarked brand of C.E. approved armour
Fabric is able to resist the penetration of water to some degree but not entirely
Highest grade synthetic leather
Patented ventilation system utilizing snaps to secure vents in open position for maximum airflow.
Meets or exceeds C.E. testing standards
Fabric allows air to pass through with ease
-
Abrasion and tear resistant Aramid reinforced
Strap and snap adjusters in the waist and/or sleeves for tightening and loosening fit.
Fabric has stretchable flexibility
This standard applies to protective footwear for motorcycle riders for use while riding motorcycles for on or off road activities.
Sleeve pocket that accommodates a laptop computer.
Has reflective material for higher visibility.
Offers 6L of total volume in storage capacity.
Offers 18L of total volume in storage capacity.
Offers 50L of total volume in storage capacity.
Offers 30L of total volume in storage capacity.
Offers 25L of total volume in storage capacity.
Offers 14L of total volume in storage capacity.
Offers 28L of total volume in storage capacity.
Attachments will fit universally regardless of motorcycle type.
Does not allow water to penetrate material.
Magent for magnetic mounting system.
-
-
-
-
-
-
Great Replacement Lid from my 10 year old Bucket.
Excellent Ventilation and peripheral vision...!!
Shop in Canada
Fast Service and Exchanges
Orders Ship Next Day
Free Shipping On Orders Above $89